Review- Veevus Tying Threads and Tying Materials

A thread is a thread is a thread, right ?
Well, no. Considering that in most cases, tying thread is what holds everything together when we’re tying flies, it’s quality and reliability are what ‘makes or breaks’ the tying experience and our results depend on it doing what we expect it to do.

“The choice of tying thread for a particular application in fly dressing is probably one of the most important decisions a tier will make. It is as important as the choice of materials used for the flies themselves. 
Thread choice can be a very subjective issue, many tiers will have love/hate relationships with different threads from time to time, and this can be the result of incorrect thread selection in the first place.”
quote from Dr. Paul Little / Fly Dresser – The Journal of the FlyDresser’s Guild 2011

A few months back, I discovered and saw tying videos of  these new threads and wrote Emir Veevus, the founder of the company to ask for some samples to review. A few days later I received a nice little box with 12 spools comprised of:

6/0 F02 White
8/0 E01 Black
8/0 E02 White
8/0 E04 Red
8/0 E06 Pink
10/0 D04 Light (Almond) Green
12/0 C05 Burgundy/Claret
14/0 B02 White
14/0 B05 Brown
M11 M Stomach
(Yup, Stomach does sound a bit ‘medical’ but Emir tells me that it was the result of  the translation of ‘abdomen’ or ‘body’ and the word stayed. I think it’s cool and yet another item that sets this company apart !)

Tinsel & Wire-
T12 S Holo-Tinsel
W01 S Steel Wire

From the Veevus site we see that these threads are stronger than all non-gsp type threads (gel spun polyethylete) which is a wonderful quality because it’s enormously frustrating to have a thread break before we’re finished with the fly… but is that what makes a good thread ?
Not really, or at least it needs some other qualities on top of strength.
If strength was the major criteria we could just hand out a considerable amount more money at the shop and buy the gsp threads mentioned above and happily live with the knowledge that our thread is strong enough to bend almost any hook in the vise without breaking.
Ok, that might sound pretty good but it doesn’t sound pretty good to me. What we find out when we buy the gsp threads is they slip on or around materials, need to be kept under a constant pressure because they don’t stretch and in the case of tying in foam or deer hair or similar, they often cut right through the materials (Add your favorite cuss-words here) because the thread is very thin and the buyer was told by the advertisers that they could tug down like a brute, so they tug like brutes…

Enough with the strength, let’s look at other aspects.


When a thread stretches it will later retract when tension is reduced. This holds our materials better than a thread that won’t stretch.
All of the Veevus threads stretch a little. Just enough and in an easily controllable and predictable manner.
Just right.

Twisting / Splitting-
Their non-bound multi-filament construction allows full and easy control. Sure, all threads can be twisted tighter but not all can be untwisted easily. Untwisting is yet another key element in thread management as it allows us to either lay a smooth and flat layer of thread for its appearance or for reducing bulk but also to use that extra width to bind down certain materials with that wider surface contact.
Splitting the threads to insert dubbing is as easy as it gets.
While the other threads have a many multi-filament construction, the 6/0 is a two-strand making this extremely easy, fast and a very strong for inserting bigger materials needed for the construction of streamers, pike or saltwater flies. I don’t even need a dubbing needle to split this thread. Just unwind it a bit, give it some slack and it opens up on it’s own.
Just right.

Or more specifically, abrasion resistance. Number one here is the dreaded ‘hook-point tick’ of the thread while winding around the shank. Although this occurs less and less as time goes by, I won’t say that it never happens to me but here I did a few tests on purpose to see how they hold up. Some threads tear right away. The Veevus threads don’t.
Just right.

Available in a vast array of colors as you’ll see here, if you need to add your own color because you want a special tone or just want a different color without tying off and changing spools, they take permanent marker’s inks very well and fast and the color stays on.
Just right.

Rarely mentioned yet a very important aspect is the spools themselves and how the thread was wound on them. You won’t find any loose ‘starter’ ends coming off the side lip of the spool like it’s quite common with Benecchis’… All of the threads have been wound cleanly and evenly with just the right amount of tension leading to very smooth tying.
It would be very hard to say exactly if this is the reason why, but after two fly-tying fairs, several tying courses and the subsequent traveling and bag-throwing, not a single spool has unwound which usually results in the thread crossing itself, blocking up while tying and ending up flying through the air with frustration… Just right.
And before I stop with the smooth bit, some of the spools seem (my guess) to be made of Rilsan, a low-friction plastic often used as washers or in other mechanical parts. They’re slightly translucent. When placed in bobbin holders there is a strong marked difference in rotational smoothness from any other type of spool I’ve ever seen, once again making tying very precise, predictable and smooth.
I hope they extend the use of these spools throughout the whole range.
Just right.

Stomach Thread-
As mentioned above, it’s initial purpose is for building abdomens and bodies but it’s a lot more versatile than that. It’s construction is a cross between a floss and a thread which means it can also be used for tags, tails, hot-spots, wings and heads. It is easily twisted tight or loose and split to insert whatever dubbing-type material you might want to bind down. The spool I received is a bright fluorescent yellow/green and by inserting darker dubbing in the split-thread,  was able to get a much more ‘natural’ color of the body on the outside while getting a glow from the thread from underneath, specially visible when wet. Cool and Just right.

Holo Tinsel & Steel Wire
Both are excellent products.  What greatly sets these apart from many others is once again their strength and flexibility. Once mounted on a bobbin holder they can easily replace tying thread: Including tying on, binding on materials, dubbing and whip finishing. This opens up quite a lot of creative possibilities, helps reduce thread bulk, makes tying easier and more precise and there’s no waste.
Just right.

Steel Wire abdomen on ‘Silver and Gold’

After using these products several months there isn’t a single negative aspect I could add here. That’s quite impressive considering how much I like to critique and criticize…
I’m using the smaller 10/0, 12/0 and 14/0 sizes almost exclusively and with complete confidence for trout-type flies and my technique and general ‘tying tidiness’ has gone up a notch, maybe several.

As in my other reviews, this is a two part question and answer affair.

– Do I like these products and would I recommend them ? Most definitely yes.

– If I where to have only one brand of tying threads would the Veevus be it ?
Again, most definitely yes and quite happily. They’re that good and are exactly what i expect from a versatile top-end product.
Just right.

You’ll find all these products and more tying goodies on the Veevus site.

16 thoughts on “Review- Veevus Tying Threads and Tying Materials

      • Got two spools from Uffe Hagström as test from the fair.12/0, black and white. When my Benechi threads are tied out, and the autumn tying season starts. I will have full set with Veevus!

  1. would you know how to get those in France? all the sites in the veevus dealers list I tried either don’t work, don’t sell veevus, or don’t seem to ship international

  2. Hey, Some good insight into choosing thread in this blog. I bought a bunch of the treads after reading this review. Great thread!

    • good to see ya here, buddy !
      glad this was of help. let’s see how you used it, huh ? 😉
      (send some pics by email if you’d like)
      cheers !

  3. Hey,

    I am not sure if you really want to see that much CDC! I got some of the EP Trigger Point stuff and used it. I like it (and caught some fish). Still trying to ID the perfect amount so the body stays slim but there is enough fluff to float.

    Will email you some pics when I get a chance. Need a new P&S camera….


    • it’s not because i’m not too crazy about using cdc that i don’t enjoy looking at it ! 😆
      EP TP, remember this one ?
      Honey emerger
      it caught that lovely trout on the Clyde with you and after about 30 or so other fish this season, i finally lost it the other day.
      the wing volume is just about perfect with these fibers and the slim body profile.
      here’s the materials list: honey

  4. Who is using the 16/0? I’ve tied a few nymphs with it and haven’t broken the thread yet. It has a slippery feel, is fantastic for split thread dubbing and is incredibly strong for the fineness.

  5. sounds good Tim. i decided to simplify my life (sort of… ) and got the whole range of colours in 8/0 & 14/0 with the latter being a wee bit stronger than the 16/0. they’re all excellent.

Comments are closed.