Fly Fishing Tips and Tricks- Fitting Braided Fly Line Loops

to celebrate TLC’s shiny new face here’s some more than excellent tips on installing braided loops from Mike Barrio of Barrio Fly Lines.
the trick with the monofilament ‘threader’ really makes it easy to snug up the fly line end inside the braid and get it just right. enjoy !


Personally, I prefer to connect my leader directly to my fly line with a constriction type knot, in my experience this offers me a better transition from fly line to leader and better presentation. But braided leader loops are a very popular alternative method and I am frequently asked how to fit them.

There are numerous braided leader loops available on the market, many of these are too long and too heavy for most fly line tips and can cause them to sink, especially when fitted to lower weight lines. A lot of them are also very poorly made and can fail on a good fish. In my experience, the Roman Moser Minicon Loops are the best that I have found.
2-160515124137These are easy to fit. I usually grab 10 inches or so of nylon, thread it through the loop and hold it back in a ‘U’ against the loop ( loop through loop ) then I slide the red sleeve over the loop so that the sleeve is mostly sitting on the nylon.
2-160515124440Then I insert the fly line inside the braid at the other end and feed it up through the braid until it reaches the point where the loop is formed. Sometimes the end of the braid can be a bit tight making it difficult to insert the fly line, but if you push or prod the end of the braid with your finger this will help to loosen and expand the braid a little.
2-160515124718

Now hold the nylon and slide the sleeve back over the loop and along the braid until it reaches the other end, I like to have about 3/4 of the sleeve sitting on the braid and 1/4 on the fly line.

A braided loop works by constriction, so the harder you pull the braided loop from the loop end, the more it will tighten and grip the fly line between the loop and the ‘sleeve anchor point’. Don’t be tempted to add a spot of glue at the loop end, as this could cancel out the constriction of the braid.

Braided loops work well when simply fitted like this, but some folk like the added assurance of a spot of waterproof superglue. If you wish to add waterproof superglue, stop sliding the sleeve just before you reach the end of the braid (picture 5) add a little glue to the end of the braid and then slide the sleeve over this to the 3/4 – 1/4 point. Only use a very small amount of glue, as slightly too much can cause your fly line tip to sink.

Hope this is useful 😎

Best wishes
Mike


as for TLC’ shiny new face, it was time to do some spring cleaning and since the rags and cleaning solution where out i thought i’d find a simpler, cleaner looking page layout that also works faster and better at home or with mobile devises.
since feedback always helps, please let me know if you’re having any viewing, navigation or whatever issues and i’ll work them out.
here’s hoping you like the new look and thanks again Mike !

Hinging or Myth…

brillantissime Jim Williams once again !  Jim’s one of those big things that pays attention to the little things in life and here’s a doozy !

this time it’s about connecting loops:

(don’t worry and yes, that’s the WRONG way. it’s only there to hopefully peak your interest enough to click the pic to find the correct way once you’ve finished reading here)

but more importantly and the real gem of this article because hardly ever mentioned: loop size, monofilament stiffness/suppleness and how they all go together as a whole to create a flawless energy-transmitting non-hinging  connection. enjoy !

Double Loop-to-Loop Connection

by Jon B. Cave via Rio‘s blog

a most fantastic find here. as Jon explains in great detail, if the joining line diameters and/or stiffness don’t match, the connection doesn’t seat properly, making it both hinge and weaker.
“The union formed by joining one loop to another is a strong one when properly done (see photo 1); however, if the loop-to-loop knot isn’t executed correctly by drawing the loops tightly together so that they remain seated in place, a hitch may develop at one of the loop ends and weaken the connection (see photo 2).

the solution is as simple as is it ingenious, double the loop ! brilliant !

click here for Jon’s great article.